Ultimate Multi Tool QcFire v0.9 - Fixed Mi5 Flashing and more...

We are pleased to announce
Ultimate Multi Tool - QcFire v0.9
The Ultimate Qualcomm Module

Repair almost all Qualcomm Devices supporting Firehose Protocol

Supported Brands
- Alcatel
- Cherry Mobile
- Coolpad
- HTC
- Huawei
- Lenovo
- Lyf
- Micromax
- OnePlus
- Oppo
- Swipe
- Vivo
- Xiami
- YU


Supported CPUs for Auto Detection
- 8610
- 8909
- 8916
- 8917
- 8929
- 8936
- 8937
- 8940
- 8952
- 8953
- 8974
- 8976
- 8992
- 8994
- 8996
- 8996
- 8x10
- 8x26


Supported CPUs with Internal Loaders:
- 8610
- 8909
- 8916
- 8917
- 8929
- 8936
- 8937
- 8940
- 8952
- 8953
- 8974
- 8976
- 8992
- 8994
- 8996
- 8996
- 8x10
- 8x26


Enhanced Xiaomi Mi5 (MSM8996) Flashing
- To flash all rawprogram files, you need to select them one by one.
- We will automate it for such firmwares in coming updates.


Added Autodetection of Redmi 1s


Added Loader for Vivo Y55
- Incase of Vivo Y55, please untick Auto and select 8937_4 manually.


Fixed Booting Issue on some MSM8996 Devices
- Some users were getting issue on getting Payload Information.


Fixed FRP Reset for Some Devices, was Broken in 0.8
- We again recommend to make Security Backup first.


Updated Automatic Patch File Select Method
- Now for rawprogram_unsparse etc, it will auto select required Patch file.


Added Warning in Log incase some parts of Firmware are missing.
- You can now decide before flashing if you want to flash with these files missing.


Other Improvements which we forgot to mention  




COMMON ERRORS AND FIXES
- Write Err while sending loader.
- It means that selected loader (either manual or auto) is not compatible with hardware. You should try with other loader for same CPU (as mostly all CPU will be detected perfect with QcFire), or use Factory Loader which often comes with Firmware.

- Init Handshake Sequence Failed.
- Common communication problem with phone. Try to connect phone again in download mode and try operation again.

- Reading Pattern Data... Data Missing! Failed
- Read Pattern is supported only on Android older than 6.x. It should work fine with 5.x and lower Android Versions.

- Mi Account Not Active
- It means that Mi Account data was not found. Check if phone asks for Mi Account on startup. Otherwise, Format FS, turn phone ON, then turn OFF and try again.

- Warning! High Speed Driver not installed.
- This will seriously downgrade Reading performance. Please update driver from QcFire\Drivers folder. However, it should not affect flashing procedure.