Volcano Unitool 1.1.2 World's 1st Added Samsung Gear - Gear 2 & Gear Neo & Much more

• World's 1st Added Support for Samsung Gear & Gear 2 & Gear Neo
  • World's 1st Added Samsung Gear
    • Supported Feature
      • Set Date
      • Set time
        • in Samsung Gear there is no option to set Date & Time without Sync with phone & Phone must be installed very old ver of Samsung Manager which is almost impossible to find/install & most important now a days there is almost no compatibly of Samsung Manager software with phone
      • Camera Sound on
      • Camera Sound off
        • Very useful for Spy purpose 
        • it's disable camera shutter sound to make it to use any where silently 
      • Gear Must be Rooted & Activated
      • while activation screen where Gear finding bluetooth connectivity Press home buttom from more than 20 time will bypass activation screen
    
    
    • World's 1st Added Samsung Gear 2
      • Supported Feature
        • Set Date
        • Set time
          • in Samsung Gear there is no option to set Date & Time without Sync with phone & Phone must be installed very old ver of Samsung Manager which is almost impossible to find/install & most important now a days there is almost no compatibly of Samsung Manager software with phone
        • Camera Sound on
        • Camera Sound off
          • Very useful for Spy purpose 
          • it's disable camera shutter sound to make it to use any where silently 
        • Gear Must be Rooted & Activated
        • while activation screen where Gear finding bluetooth connectivity Press home buttom from more than 20 time will bypass activation screen
    
    
    • World's 1st Added Samsung Gear Neo
      • Supported Feature
        • Set Date
        • Set time
          • in Samsung Gear there is no option to set Date & Time without Sync with phone & Phone must be installed very old ver of Samsung Manager which is almost impossible to find/install & most important now a days there is almost no compatibly of Samsung Manager software with phone
        • Camera Sound on
        • Camera Sound off
          • Very useful for Spy purpose 
          • it's disable camera shutter sound to make it to use any where silently 
        • Gear Must be Rooted & Activated
        • while activation screen where Gear finding bluetooth connectivity Press home buttom from more than 20 time will bypass activation screen

• Added Phone book Backup for Qualcomm Vivo Phones
• Added Phone book Backup for Qualcomm Oppo Phones

Sample Video for Simple work :P

Download Now : 
Index of ./VolcanoBox/Inferno - VolcanoBox 3.0/
Index of ./VolcanoBox/Pack1 aka Merapi Tool/

Miracle box 2.43 With Always World's 1st MTK HelioX20/MT6797|MTK 6755 Improved...

eMMC Pro V1.08 - New Features

eMMC Pro 1.08 Release Notes 

We are trying to make more powerful eMMC software with every each update
There are alof of optimizations and progres based on customers requests and demands.

1. # Detection Routines improved .
2. # SW Default Set as "12 Mhz"
3. # Format Functions added
4. # Partitioning / GP Area Partitioning features added.
5. # Config Features Added .
6. # Soft Erase Function Added .
7. # Deep Erase Function Added .
8. # UI - Full Flash mode added .
9. # UI - Partition mode added .
10. # UI - Selection USER ( ROM1 ) .
11. # UI - Selection BOOT1 ( ROM2 ) .
12. # UI - Selection BOOT2 ( ROM3 ) .
13. # UI - CID Parsing .
14. # UI - CSD Parsing .
15. # UI - Config Added .
16. # UI - GP Area Partition Settings added .
17. # New Firmware Released Version = 2016122615000000

When you first run eMMC Pro V1.08 sw will update your firmware .
With the new firmware we have implemented better detection and more features.
and makes it more stable and alot more powerful .

[Config Features Added]
We have added Format , Soft Erase , Deep Erase Function in the software 

[Soft Erase]
Provides a host explicit erase function.
The erasable unit of the eMMC is the “Erase Group”;
Erase group is measured in write blocks which are the basic writable units of the Device.
Once the erase command completes successfully, the device address range that was erased shall behave-
as if it was overwritten with all ‘0’ or all ‘1’ depending on the different memory technology.

[Deep Erase]
In addition to the Soft Erase command there is also an optional Deep Erase command.
The Deep Erase command differs from the Soft Erase command in that it requires the device to -
execute the erase operation on the memory array when the command is issued and
requires the device and host to wait until the operation is complete.

This should be executed the Deep Erase command with caution to avoid unintentional data loss.

[Solution for :]

1. # Wipe failed on MTK devices will be easily fixed with this option.
2. # Corrupt Disk not functioning will be solved such as Disks
   "not write protected" but devices can not be written firmware.

[Partitioning :]
General Purpose Area Partition, RPMB Partitions can be configured
General Purpose Partitions can be programmed by the setting the corresponding-
values defined on eMMC Pro Software and written into the Extended CSD registers
only once in the device life-cycle.

[UI Improvements : ]

[Full Flash mode : ]
When the file is selected with Full Flash Mode .
You are able to write the complete file as one and whole !

[Partition mode : ]
Partitions of the Dump File Selected will be displayed on the eMMC Pro UI
By selecting each partition and selected partitions will be written into target device .

[Frequency Set : ]
12 Mhz as Default

[Area : ]
USER ( ROM1 )
BOOT1 ( ROM2 )
BOOT2 ( ROM3 )
In order to comply among the eMMC Boxes and for easy understanding for our users .
We have identified the on the software ROM1 , ROM2 and ROM3 for each Area
There is full access (R/W) and all the features are compatible with eMMC Pro.

[CID / CSD Parsing : ]
There is alot of information is provided with the CID and CSD Values
such as Manufacturer Details , Device Configuration , Write Protection ,
Serial Number , etc.. Complete device specifications of the eMMC
Complete identification of the eMMC will be displayed in eMMC Pro UI .

[eMMC Pro Support page : ]
We are sorry we had a down time during the new year season
but we recovered everything is perfect now .
Thanks for all the feedbacks.




Thank you for all eMMC Pro Customers to keep sending us requests and suggestions .
There is a lot more to come

Best Regards
eMMC Pro Team

Asansambox Version 3.1.8 Released

ASANSAMBOX VERSION 3.1.8 RELEASED



Add 

DIRECT UNLOCK FOR

SM-G550T
SM-G550T1
SM-G550T2
SM-J120FN
SM-G570Y
SM-G610M
SM-T377V
SM-T587
SM-P585
SM-P585M
SM-P585Y



-No need Root
-Need Set Modem port on phone setting before unlock

Add

Reset screen Locks BY

APT MODE(DOWNLOAD MODE)

FOR

SM-J320YZ
SM-G550X
SM-J700 EXYNOS 2016
SM-J700 QUALCOMM 2016
SM-N9300
SM-P580
SM-P900
SM-P905

HOW TO RESET SCREEN LOCK?

SELECT MODEL
GOTO ANDROID SERVICE TAB
GOTO GENERAL TAB
GOTO MISC JOB
PRESS WRITE PATCH
OPEN APT FILE
PRESS DO IT
CONNECT PHONE TO DOWNLOAD MODE
DONE
REBOOT PHONE TO RECOVERY(MANUALLY)
CONNECT USB TO PHONE
CHECK ADB PORT ON DEVICE MANAGER
PRESS RESET ALL SCREEN LOCK TWRP
OR
REMOVE SCREEN LOCK(WITH APT FILE)
DONE


DOWNLOAD

DOWNLOAD APT FILES

eMMC Pro - Presents MOTO X , Samsung N8000 Full Support

eMMC Pro New Models

[04 FEB 2017]

We are releasing more models ,
more dumps , more pinouts for our customer demands .
Thanks for the feedbacks for our all eMMC Pro Users .

We just released eMMC Pro V1.08 here

• # Moto X [ XT1096 ] Dump Uploaded [ World First ]
• # Moto X [ XT1096 ] eMMC Pinouts Uploaded [ World First ]
• # Samsung N8000 Dump Uploaded
• # Samsung N8000 eMMC Pinouts Uploaded
• # Samsung N8000 eMMC Pinouts Uploaded
• # LG F460L Dump / Fixed
• # Samsung J100H Repair Pack / Fixed

You can now operate with almost all mobile phones with eMMC / eMCP inside !